Horizontal Crusher
  • Horizontal Crusher

  • Horizontal Crusher

  • Horizontal Crusher

  • Horizontal Crusher - LANE Machinery Groups

  • Horizontal Crusher - LANE Machinery Groups

Horizontal Crusher

Introduction to horizontal crusher:

1) Horizontal crusher is a new type of high-efficiency single-rotor reversible crusher.
2) The use of high-speed rotary blade crushing fiber, the adaptability of the moisture content of the material is strong, especially for the fermented decomposed garbage or other materials with a moisture content of ≤ 30% can be powdered.
3) Horizontal pulverizer powder size can reach 20-50 mesh, can meet the general fertilizer granulation equipment feed size requirements.
4) Horizontal crusher also known as semi-wet material crusher, it is mostly used in organic fertilizer production line and processing links.

The application of semi-wet materials crusher:

The high-output semi-wet material crusher is widely used to crush straw, sludge, biogas residue, fertilizer, etc. The application of semi-wet material crusher is as follows:
1) Dry and wet animal manure after fermentation, such as chicken manure, pig manure, cow manure, etc.
2) Dry mud needs to be crushed.
3) Biogas residue in methane tank.
4) Municipal waste that needs to be crushed; also grinding plastics, crushed ceramics or bricks, etc.
5) Sun-dried seeds and rattan.

Model Capacity(tph) Power(kw) Overall Size(mm) Input Size(mm) Output Size(mm)
LAC-60H 2-4 30 1390*1290*1310 400*600 300*450
LAC-80H 3-6 30 1610*1400*1510 400*600 300*450
LAC-90H 4-8 37 1610*1400*1710 400*600 400*450


Horizontal crusher can be divided into three main parts:

1) Frame part: the normal operation of all machinery can not be separated from a solid frame, the machine frame is all made of high-carbon steel plate, channel steel welding.

2) Rotor crushing part: horizontal crusher adopts double-layer blade crushing, the crushing effect is twice as much as other products, the material enters into the crushing chamber from the feeding port, and is continuously ground by the double-layer blade, so that the material reaches the requirement of granulation.

3) Transmission connection part: the machine adopts flexible belt transmission. It is driven by the motor to drive the pulley and belt, which is directly transferred to the main shaft, so that the main shaft rotates at a high speed to achieve the crushing effect.

Horizontal crusher working principle:

1) Horizontal crusher is driven by the main motor drive pulley, through the belt transmission to the main shaft, through the installed in the main shaft blade rotation.
2) The material is added from the feeding end, and discharged from the discharging end after being rotated and cut by the blades in the cylinder.

How to maintain the horizontal semi-wet materials crusher:

1) Before turning on the machine, please make sure that there are no iron objects in the machine cabinet.

2) Do not randomly replace the belt pulley, in case the speed is too high to make the crushing chamber explode, or the speed is too low to affect the efficiency of the coal rock

3) Organic fertilizer equipment, horizontal crusher should be empty for 2-3minutes after starting, to confirm that there is no abnormal phenomenon before feeding work.

4) Pay attention to the operation of the semi-wet material crusher in a timely manner, feed the material uniformly, to prevent blockage of bogging, do not work for a long time to overload.

5) Regular inspection of the machine parts monthly, check the worm wheel, worm gear, lubricating block on the bolt, bearing and other moving parts are flexible rotation and wear.

6) If the machine is not used for a long time, the machine must be wiped clean all over, and the surface of the machine should be coated with anti-rust oil.


Horizontal crusher crushing effect display:

Horizontal crusher advantages:

1) Semi-wet material adopts two-stage crushing, the material is crushed by the rotor disk on the cutting disk, transported to the crushing chamber using the hammer blade for secondary crushing, and finally discharged by the discharge port.

2) It is not designed to screen the bottom of the screen, will not be crushed due to wet materials and clogging, resulting in burned out motor, affecting production.

3) Horizontal crusher adopts high alloy wear-resistant hammer head, hammer blade is made of forging, especially strong and wear-resistant, more wear-resistant than the ordinary hammer head strong, increasing the service life of the hammer blade.

4) Horizontal crusher adopts two-way gap adjustment technology, if the hammer blade is worn, no need to repair, adjust the position of the hammer blade can continue to use.

5) It can be easily operated by only one person, which is not only safe and reliable, but also easy to maintain.

Get in touch with us
Relative Products
Flat Die Granulator Flat Die Granulator
Rotary Drum Granulator Rotary Drum Granulator
Rotary Drum Churning Teeth Two-in-one Granulator Rotary Drum Churning Teeth Two-in-one Granulator